I’m going to build my vacuum-setup, I want to order this vacuum-switch PTF-4300-X30 http://www.pneuaire.com/f4300.html but does anyone now a supplier in Europe for a good switch?
I started to build the platform for the pump and tank. Wish me luck 
Greetings Henk
Moved to Equipment Talk due to content
Waiting for my parts, I sprayed some kandy at the tank…
Gr Henk
daaaaaaaaaaaaaaaaaaaaaaang
I do not want to disappoint you, but that switch is useless. (tried it)
Check the solutions in the following PDF:
http://www.brandscomposiet.nl/products/documentation/n/B52%20Werkplaatsinventaris.pdf
There are 2 good working mechanical switches (you want these) and a VAC-REG from Airtech, which keeps the pump running. You do not want your pump running continuously, as it will spit oil like crazy, unless you reach ultra-deep vacuum levels.
Is this a good switch? http://www.ebay.com/itm/SMC-ZSE40-01-62L-Digital-Vacuum-Pressure-Switch-Analog-/170746781991?pt=Pneumatic_Hydraulic_Valves_Parts&hash=item27c14d2127#ht_2373wt_780 So the pomp stops when there is a good vacuum.
Gr
Yes, you can use that one, but you will need a power supply, a relais (and spare relais, in case you blow one) and a housing.
I can supply you a decent mechanical switch for some 100 euro, which you simply screw on the tank (1/2" or 3/8", I should check) and which is able to switch 230V directly.
Thanks, I now about the relais and power supply. So if I’m right you can supply the parts for me? can you mail me? I cant pm.
Gr Henk
Got the Email address. I suggest removing it here to prevent spam.