Definately got lemons here lol. The nice thing is i can “fix” the dry spots, trim, & finish these two panels. There is a left and right side in one mold - infused in one shot. kinda.
The parts actually came out with a matte finish on the mold side… the mold has a slight texture from the oem parts i used to make the mold. It’s such a fine texture that three coats of clear coat would level it out and bring out a nice shine.
The first layer into the mold was 2x2 twill 6oz carbon fiber. Then two full layers of 9oz satin eglass. I should say…these are cosmetic parts, not structural. I don’t get often to make structural or mechanical parts, but soon I will be making a ram air intake duct.
There is some bridging on these side panels, not as bad as i thought it may have bridged though… so i think i can save these parts/repair them. I’ll post after they are trimmed and finished with more pics.
http://s210.photobucket.com/albums/bb186/Fastrr_photos/?action=view¤t=firstR1sides.jpg