RenInfusion 8604 for sale

Classifieds Materials - FOR SALE / WANTED
#1

I purchased 6 gallons of this Reninfusion epoxy #8604 or 8606, not sure which one. I’m willing to sell one gallon of the resin with enough hardener for that gallon. $60 + actuall shipping cost.

first person that pays gets it. I can only ship to Canada and USA locations.

I emailed the guy to ask which resin it is that I bought. If it is 8604 it is a room temp cure infusion resin. If it is 8606 it is an oven cure infusion resin. Either way this is a very good buy.

Spec Sheet for 8604:
http://www.freemansupply.com/datasheets/RenInfusion/8604.pdf

Spec Sheet for 8606:
http://www.nfgsales.com/files/active/0/RENINFUSION%208606_Ren%208606.pdf

#2

I’m so tempted:o

#3

If it ends up being #8606 i’m going to sell it all by the gallon.

Reason being I don’t have an oven for curing.

#4

it says that it room cures, but to achieve very high tg you need post cure…

any way of finding out what the tg would be with only room cure or modest post cures at around 100-120F?

#5

yeah but the viscosity of 8606 is like 1800 cps. Heat the mixed resin to 125F degrees and it becomes 300cps. So I’m thinking the trick is to heat the resin once mixed and keep the heat on it until the part is fully infused, or 3/4 done infusing.

RC my best guess is maybe around 170 TG if oven cured for 6-8 hours at 120F degrees.

#6

Ok guys, IT IS #8604 RenInfusion room temp cure epoxy. It will come with hardener.

Like stated I’ll sell a full gallon of resin + hardener for $60 + actuall shipping cost. I don’t use UPS because they overcharge. Probably Postal delivery or Fed Ex Ground.

PayPal gladly accepted.

#7

I’ll take a gallon. Do you accept Paypal?

#8

Yep, PM sent :slight_smile:

#9

Thanks so much!

#10

Hey fastrr, post your results and if you are satisfied with the system. Thanks!

#11

Ok, I will do that.

#12

don’t forget those pics