Its pretty much offical. I am getting rid of everything. Price are firm only because they are already so low.
Feel free to ask any questions
Infusion Resins:
Hydrex 100
Infusion Resin
Both from fiberglasssupply.com. Inlcudes the MEKP and the other hardeners required for the Hydrex resin. $50 for both plus shipping.
Assoretment of carbon fiber Fabric. Approxiamtely 5lbs worth. Includes 4inch wide by 24in long 12k
$15 plus shipping
Packaged 6k fiberglass and a 5lbs of assorted fiberglass cloth
$10 plus shipping
Airtech Yellow Bagging tape, this is the good stuff. 6 complete rolls and 2 half rolls, 1 full roll of that blue tape for vacuum bags.
$4 per roll or $20 for all the rolls and I will throw in the half rolls. Blue tape: $3
Vacuum Infusion setup kit. This includes peel ply, tons of different types of flow media approximately 10ft long by 2ft wide, 5ft of sprial tubing
$10
Wet Lay Up kit: Bleeder, 1in and 2in wide paint brushes
$10
Vacuum Bagging: 2 completely untouched packages of yellow vacuum bag from Fiberglast.com
$10 for both
2 Red Airtech Spray tach cans: $5 for both
Adjustable heat lamp. Goes up to 130degrees F. These are the nicest setups around. Push botton on/off switch I have 4 total
$15 each
In case you haven’t seen my other material:
Thats 40yrd of 6k 5harness
And a complete roll of Airtech Peel ply.
Seen here: http://www.compositeforum.werksberg.com/showthread.php?t=3532
All prices DO NOT include shipping. I will break items up if you ask. All items sold AS IS
Please email me at: pokerface@roadrunner.com or send a PM. I will respond faster to emails. Make the subject of your email: COMPOSITE PIECES FOR SALE
SCROLL TO MY LAST POST FOR THE UPDATED LIST.