If it is still listed here, I still have them in stock. Min. Shipping charge is $10 so why just get 1x item? What is your time worth…mine too…?
I’ll be listing some more Composite surplus materials on here and if you are interested, PM me your orders with your address (I’m trying to keep previous buyers addresses on file but…)
I’ll then box them up and figure out shipping costs (I now use USPS Priority Flat Rate box shipping for only $10 each, but limited space) for a final billing. You can pay via Paypal (best for shipping) or mail a MO, cash or Check (held until it clears) to me (slow for time).
I hate to take the time to figure out the final billing and then no sale goes thru (my time is costly & hard to find these days), so please make 100% you want them…
I always throw in added items, materials, handouts and such when there is space available too (but remind me if you bought anything from me on Ebay or on here as you won’t want a second set of my former composites classroom handouts…):
1 oz Plastic bottle with flip spourt of PER Odor suppressor, citrus fragance (1.2cc per gallon) $15
36" wide Fiberglass Surfacing Veil, .50 cents per yard (I have a half roll) unrolled & carefully folded, unless a large amount and you want it rolled up on a paper core…I also have some other veil that may be wider.
10 oz Fiberglass cloth 60" wide, $50 per 5 yard unrolled, taped, cut, carefully folded, bagged and placed into a USPS Flat rate box…014" to .015" thickness dry
Nylon Peel Ply, Pre cut and enveloped packed[b] 54" x 8’ $15
[/b]I have a couple lengths of different breathers, release films, vac bagging films and more that I will list here.
1x piece only: 60" x 9’ (+) of 5mm (.195) thick polyester breather material $10 (this will take up / fill a large box for cheapest shipping)
1x pieces only: 60" x 9’ (+) of 5mm (.195) thick polyester breather material with nylon peel ply & perf. release film attached
$25 each (this will take up / fill a large box for cheapest shipping) (1x tenatively sold…)
Flat / low profile clipboard clips (make yourself a CF clipboard to keep those orders in order!) $2 each with 2x 1/8" flush pop rivets and back up washers too!
[i]2 1/2 gallon full sealed bucket of CABOSIL $15 (no USPS flat rate shipping on this item, too big)[b]
1x AJ tools Mini air spray gun (nozzle size .07) [/b]great for PVA mold release spraying, 20 to 40 psi 1.6 - 4.0 cfm 1/3 hp [b]$15 NIB
1x AJ Tools pnematic die grinder (1/8" & 1/4") [/b]with 5x stones $10 NIB
[/i]
I have an unopened, 5 gallon pail of PER crystal clear casting / sanding resin (with surfacing agent) but what would the members want it poured down to?
Pint, Quart or Gallon?
More soon…
